KIT Placement and Position

  1. Fully extend the rear leg of the KIT.
  2. Place the KIT on level ground 10-feet directly behind the ball/tee position and in-line with the
    target.
    Note: The target line can be displayed in the Full Swing app or on the OLED screen on the unit.
  3. Confirm the KIT is lined-up with the intended target and that there are no obstructions. Note:
    Hitting the ball from outside the target line or with obstructions may result in missing or
    misrepresented data.

KIT_Placement_1.jpg

KIT_Placement_2.jpg

KIT_Placement_3.jpg

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.